— Recent Publications —
Refereed Chapters in Books:
Papers in Refereed Journals:
- Sabziparvar, A., Foruzanmehr, M. Coupled effects of fibre composition and lumen infiltration on pore network development in internally cured cement pastes. Materials and Structures/Materiaux et Constructions. 2026. DOI: 10.1617/s11527-026-03056-x
- Ponga, D., Foruzanmehr, M., et al. Modeling and optimization of the mechanical and acoustic properties of hemp-hurds cement boards. Journal of Building Engineering. 2026. DOI: 10.1016/j.jobe.2026.115566
- Solaiappan, K., Foruzanmehr, M. A Rheological test method for determining the printability zone of cementitious 3D printers. Journal of Building Engineering. 2026. DOI: 10.1016/j.jobe.2025.114566
- Ponga, D., Robert, M., Foruzanmehr, M. The influence of hydrothermal pre-treatment of hemp hurds on the compatibility and performance of cement-bonded boards with GU, white, and CSA cements. Journal of Building Engineering. 2026. DOI: 10.1016/j.jobe.2025.114766
- Beuthe, C., Foruzanmehr, M., et al. Effects of hydrolytic and freeze-thaw aging on the performance of spruce wood. European Journal of Wood and Wood Products. 2025. DOI: 10.1007/s00107-025-02228-w
- Wylie, D., Sartaj, M., Foruzanmehr, M. Ammonia removal from aqueous solution using novel biosorbent developed from TEMPO oxidized flax fibres. Journal of Water Process Engineering. 2025. DOI: 10.1016/j.jwpe.2025.107322
- Sabziparvar, A., Foruzanmehr, M. An investigation into the microstructural evolution and shrinkage control in internally cured mortars with milkweed fibres. Case Studies in Construction Materials. 2024. DOI: 10.1016/j.cscm.2024.e03946
- Hernandez-Varela, J., Chanona-Perez, J., Foruzanmehr, M., et al. Assessing the reinforcement effect by response surface methodology of holocellulose from spent coffee grounds on biopolymeric films as food packaging materials. Biopolymers. 2024. DOI: 10.1002/bip.23585
- Sabziparvar, A., Ponga, D., Foruzanmehr, M. Enhancing hydration and internal curing in cementitious mixes: The impact of pre-treated milkweed fibres. Case Studies in Construction Materials. 2024. DOI: 10.1016/j.cscm.2024.e03079
- Lemaire-Paul, M., Foruzanmehr, M. The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions. Wood Science and Technology. 2023. Wood Science and Technology. DOI: 10.1007/s00226-023-01492-4
- Lemaire-Paul, M., Beuthe, C., Riahinezhad, M., Foruzanmehr, M. The impact of vacuum pressure on the effectiveness of SiO2 impregnation of spruce wood. 2023. Wood Science and Technology. DOI: 10.1007/s00226-022-01448-0
- Sabziparvar, A., Boulos, L., Foruzanmehr, M. Effect of fiber length and treatments on the hygroscopic properties of milkweed fibers for superabsorbent applications. Environmental Technology and Innovation. 2022. DOI: 10.1016/j.eti.2022.102930
- Metaferia, I., Foruzanmehr, M., et al. An integrated investigation of the crystalline, rheological and physical properties of corrosion products in cementitious materials. Results in Materials. 2022. DOI: 10.1016/j.rinma.2022.100301
- Bayart, M., Foruzanmehr, M., et al. Poly(lactic acid)/flax composites: effect of surface modification and thermal treatment on interfacial adhesion, crystallization, microstructure, and mechanical properties. Composite Interfaces. 2022. DOI: 10.1080/09276440.2021.1884470
- Ovlaque, P., Foruzanmehr, M., et al. On the effectiveness of the addition of milkweed floss fibers on processing and mechanical properties of PLA biocomposites. Polymer Engineering & Science. 2020. DOI: 10.1002/pen.25388
Papers in Refereed Conference Proceedings:
- Beuthe, C., Abedi, F., Foruzanmehr, M. The effect of cellulose nanocrystal treatment on the properties of spruce wood. In proceedings of conference: CAMX 2024- Composites and Advanced Materials Expo, San Diego, USA. 2024. DOI: 10.33599/nasampe/c.24.0277
- Rahimi, F., Foruzanmehr, M., et al.The effect of a dip/spin-coating method on the physicomechanical properties of TiO2-grafted flax-reinforced poly (lactic acid) composites. In proceedings of conference: CAMX 2024- Composites and Advanced Materials Expo, San Diego, USA. 2024. DOI: 10.33599/nasampe/c.24.0279
- Ovlaque, P., Foruzanmehr, M., et al. Feasibility study of injection molding of polylactic acid reinforced with milkweed floss hollow fibers. In proceedings of conference: International SAMPE Technical Conference, Seattle, USA. 2017.
- Bayart, M., Gauvin, F., Foruzanmehr, M., et al. Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers. In proceedings of conference: International SAMPE Technical Conference, Seattle, USA. 2017.
- Foruzanmehr, M., et al. In vitro degradation behavior of functionalized cellulosic fibers reinforced PLA composite. Frontier in Bioengineering and Biotechnology. Annual congress of biomaterials, Montreal, Canada. 2016. DOI: 10.3389/conf.FBIOE.2016.01.02540
- Foruzanmehr, M., et al. Interfacial characterization of a functionalized cellulosic fiber reinforced PLA composites. In proceedings of conference: International SAMPE Technical Conference, Long Beach, USA. 2016.
- Boulos, L., Foruzanmehr, M., et al. Coating of flax fibers: A comparison of zirconates and silanes treatments. In proceedings of conference: International SAMPE Technical Conference, Baltimore, USA. 2015.
- Foruzanmehr, M., et al. Interfacial characterization of epoxy-resin reinforced with TiO2coated flax fibers composites. In proceedings of conference: International SAMPE Technical Conference, Baltimore, USA. 2015.
- Foruzanmehr, M., et al. Physical and mechanical behavior of TiO2 thin film grafted flax reinforcements. In proceedings of conference: CAMX 2015- Composites and Advanced Materials Expo, Dallas, USA. 2015.
- Foruzanmehr, M., et al. Characterization of epoxy-resin reinforced with TiO2 modified flax fibers composites. In proceedings of conference: CAMX 2014- Composites and Advanced Materials Expo: Combined Strength. Unsurpassed Innovation, Orlando, USA. 2015.